The company CARECOM BULGARIA, is a Manufacturer/ Producer, which operates in the Slabs - concrete industry. It also operates in the Fences and gates industries. It is based in Haskovo, Bulgaria.
Other companies in the same industry:
Primer filler for vertical surfaces or for use on ceilings made from poured concrete or pre-slabs.
Decorating filler, for smoothing over.
Smooth, matt finish.
COMPOSITION AND APPEARANCE.
Solvents : Water.
Filler : Calcium carbonates.
Additives : Dispersing agent, bactericidal fungicide.
Thickeners : Cellulosic, polyacrylates.
Binders : Acrylic dispersing agent.
Density : 1.86.
Dry matter : 75%.
• Fire classification: A2-S1, d0
Interior : ideal for covering bricks, brick tiles, cement breeze blocks, cinder blocks, de-bubbling pre-slabs, shuttered concrete, aerated concrete, for redecorating stippled walls or old damaged surfaces.
• The first coat should be levelled out using 60 cm scraper or skimmed with a rule.
• After drying, the second coat should be smoothed with a scraper.
• After allowing to set slightly, squeeze the filler at a slight angle using a clean scraper.
Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs.
Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish.
• Dry extract : 75%
• Density : 1.86
• VOC content : less than 1g/l
COMPOSITION AND APPEARANCE
Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant.
From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat.
SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats.
The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.
SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting.
COMPOSITION AND APPEARANCE
Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives.
• Filling coatings
• Old paintwork
• Smoothed concrete
• Plaster blocks
SEMIN AIRLESS can be covered with any acrylic or oil-based paint.
• Dry matter: 72%
• Density: 1.6
PREPARATION OF SURFACES BEFORE APPLICATION
The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil.
Plasterboard must be primed.
SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
ABS SAFETY GMBH
This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm).
EN 795:2012, E
For flat roof pitches ≤ 5°
Weighed down using 8 concrete slabs (ca. 224 kg)
Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m²
Also designed for usage as an intermediate post in a lifeline system
Incl. 5 EPDM patches to protect your roof membrane