NEXTSENSE GMBH

Австрия

Factory icon Производител

NEXTSENSE GMBH
Web icon
NEXTSENSE präsentiert Messmodul zu Schienengeometrie-Messung

NEXTSENSE präsentiert Messmodul zu Schienengeometrie-Messung

Участие в събитие ・ 24.09.2018 г. - 27.09.2018 г. четете по-нататък Open In New icon

NEXTSENSE präsentiert auf der InnoTrans 2018 ein neues Messmodul für das multifunktionale Profilmessgerät CALIPRI. Mit dem Messmodul „Schienengeometrie“ steht ein portables System zur Verfügung, um auf einfache Weise die geometrische Gleislage zu überprüfen. Ein patentiertes Messverfahren sorgt für Unabhängigkeit gegenüber Bediener und Schienenoberfläche. Die Messung erfolgt mit dem Calipri-Sensor mittels weiterentwickelter Laserlichtschnitt-Technologie und einer handlichen Leichtbaulehre. Dazu wird die Lehre auf das Gleis aufgelegt und im 90° Winkel ausgerichtet. Anschließend erfolgt die Messung der Schienenprofile mit dem Calipri-Sensor, ohne die Lehre wenden zu müssen. Das patentierte Calipri-Prinzip ermöglicht dabei nicht nur die Erfassung des Schienenkopfes, sondern des gesamten Querschnittes. Nach dem Messvorgang kann anhand der farblich dargestellten Messdaten am Tablet-PC direkt vor Ort entscheiden werden, ob Maßnahmen zur Korrektur der Gleislage zu treffen sind.

Nextsense präsentiert Spaltmessgerät auf HxGN Live Local CN

Nextsense präsentiert Spaltmessgerät auf HxGN Live Local CN

Участие в събитие ・ 9.09.2018 г. - 11.09.2018 г. четете по-нататък Open In New icon

Nach der Eingliederung in die Hexagon-Familie, geht es für NEXTSENSE weiter bergauf: Das Grazer Messtechnik-Unternehmen veröffentlichen die nächste Generation ihres Spalt- und Versatzmessgerätes CALIPRI C14 für China und den globalen Automobilmarkt. Der CALIPRI C14 knüpft an den Erfolg von CALIPRI C10 an und punktet mit kabelloser Verbindung, Blue-Laser-Technologie und zahlreichen Software-Optimierungen. CALIPRI C14 ermöglicht damit die schnelle und einfache Überprüfung von komplexen Spaltgeometrien und Designlinien bei Karosserien.

Nextsense präsentiert manuelles HDR-Inline-Spaltmessgerät

Nextsense präsentiert manuelles HDR-Inline-Spaltmessgerät

Нов продукт ・ 8.11.2019 г. четете по-нататък Open In New icon

Erstmals gibt es ein Spaltmessgerät, das die Vorteile eines flexiblen handgeführten Messgerätes mit jenen einer automatisierten Messanlage geschickt verknüpft. Die neueste Entwicklung aus dem Hause Nextsense ist ein einfach bedienbares und ortsunabhängiges Handmessgerät, das für den Dauereinsatz direkt in der Linie optimiert ist und eine kostengünstige Alternative zu vollautomatisierten stationären Lösungen darstellt. Das neue kabellose System soll durch den, laut Hersteller, einzigartigen Einsatz von HDR-Aufnahmen spiegelnde, glänzende und kontrastreiche Oberflächen prozesssicher messen können. Namhafte Automobilhersteller durften das innovative Messsystem bereits erfolgreich testen bevor es auf der Control 2019, der internationalen Fachmesse für Qualitätssicherung, erstmals der Öffentlichkeit präsentiert wird.

NEXTSENSE presents measurement module for rail geometry

NEXTSENSE presents measurement module for rail geometry

Участие в събитие ・ 24.09.2018 г. - 27.09.2018 г. четете по-нататък Open In New icon

NEXTSENSE presents a new module for its multifunctional CALIPRI profile measuring device at InnoTrans 2018. The Calipri "Rail Geometry" module is a portable system for checking the geometric parameters of a track in a simple manner. A patented measuring method ensures independence from operator and rail surface. The measurement is carried out with the Calipri sensor using advanced laser light section technology and a lightweight supporting gage. For this purpose, the gage is placed on the track and aligned at an angle of 90°. This enables the sensor to measure the rail profiles without having to turn the gage. The patented Calipri measuring principle allows not only the recording of the rail head, but also the entire cross section. The measured parameters are displayed on the tablet PC and on the sensor and can be compared with reference values. A traffic light system is used to mark limit violations.

New Gap Measurement Gauge introduced at HxGN Live Local CN

New Gap Measurement Gauge introduced at HxGN Live Local CN

Участие в събитие ・ 9.09.2018 г. - 11.09.2018 г. четете по-нататък Open In New icon

Following its inclusion in the Hexagon family of brands, NEXTSENSE is releasing its next generation of the non-contact gap and flush measurement device CALIPRI C14 for China and other global automotive markets. The CALIPRI C14 is continuing the strong success of the CALIPRI C10 and offers latest wireless technology, new blue laser source and other CALIPRI software improvements including inspection planning, real-time dimensioning and off-line profile analysis. The CALIPRI C14 supports fast and easy inspection of complex assembly geometries and other visual and functional elements such as design and character lines on the Carbody exterior.

Nextsense presents manual HDR in-line gap measurement gauge

Nextsense presents manual HDR in-line gap measurement gauge

Нов продукт ・ 8.11.2019 г. четете по-нататък Open In New icon

For the first time, a gap measurement device cleverly combines the advantages of a flexible handheld measurement device with those of an automated measuring system. The latest development from Nextsense is an easy-to-use and location-independent handheld measurement device that is optimised for continuous operation directly in the line and represents a cost-effective alternative to fully automated stationary solutions. According to the manufacturer, the new wireless system will be able to measure reflective, glossy and high-contrast surfaces reliably due to the unique use of HDR images. Renowned automobile manufacturers have already been able to successfully test the innovative measuring system before it is going to be presented to the public for the first time at Control 2019, the international trade fair for quality assurance.

Ein guter Deal für mehr Qualität

Ein guter Deal für mehr Qualität

Нов продукт ・ 8.11.2019 г. четете по-нататък Open In New icon

Die laufende Kontrolle der Produktion in Walz- und Drahtziehwerken ist in der Stahlindustrie zu einem kritischen Erfolgsfaktor geworden. Um die Kosten für Qualitätskontrollen im Zaum zu halten, hat der Messtechnikspezialist NEXTSENSE das Profilmesssystem ATON Wire entwickelt – anwendbar bei Langprodukten mit rundem Querschnitt wie Drähten, Stabstahl und Rohren.

A Good Deal of Quality

A Good Deal of Quality

Нов продукт ・ 8.11.2019 г. четете по-нататък Open In New icon

Continuous monitoring of rolling and drawing mill production has become a critical factor in the steel industry. To keep costs for quality control at bay measurement expert NEXTSENSE developed an affordable profile measurement system ATON Wire - applicable for long products with round cross-section, like wires, bars and tubes.

Domain icon Производител

NEXTSENSE GMBH

Strassganger Strasse 295

8053 Graz - Австрия

Свържете се
Office Building Outline icon
Страница за вашия бизнес
Виждате ли това? Виждат го и Вашите потенциални клиенти! Регистрирайте се, за да Ви намират в europages.

Заявка за оферти

Създайте една заявка и получете множество оферти от проверени доставчици.

  • Само съответните доставчици
  • Съответствие с изискванията за поверителност на данните
  • 100% безплатно