Резултати за

Bolts - Производител - Германия

3293 Фирми

0 Продукти

NORMTEILWERK ROBERT BLOHM GMBH

Германия

Предприятието NORMTEILWERK ROBERT BLOHM GMBH, e Производител, и работи в сферата на Винтове. Освен това развива дейност и в сферата на Drill bushings, Cylinder sleeves, Headed drill bushes, Plug-in drill bushes, Clamping bushes, Flat head screws, Custom solutions, Turning, и turned small parts. Седалището му е в/ъв Büchen, Германия.
SCHIMMEL FILTERTECHNIK GMBH & CO. KG

Германия

Предприятието SCHIMMEL FILTERTECHNIK GMBH & CO. KG, e Производител, и работи в сферата на Филтри за течности. Освен това развива дейност и в сферата на Screens, metallic filters, Plastic filters, Filter screens, Strainer, Filtration, Filters for air and gases, filtering cartridges, и Oil dipsticks. Седалището му е в/ъв Adelsheim, Германия.
ODENWÄLDER MARZIPAN KONDITOREI GMBH

Германия

Предприятието ODENWÄLDER MARZIPAN KONDITOREI GMBH, e Производител, и работи в сферата на Бадемова захарна паста. Освен това развива дейност и в сферата на Шоколадови изделия, Карамелени бонбони, marzipan decorations, Шоколадови изделия, bolts, и Карамелени бонбони. Седалището му е в/ъв Weilbach, Германия.
JACOB GMBH

Германия

Connected by Ambition. This is our motto at Jacob. We apply our specialist knowledge as a problem solver in all matters relating to cable entry products. We have been in the market since 1922. With our broad range of products we can offer a cable entry solution for almost every application. Plus our engineering team is ready to develop special solutions together with and for our customers. We are looking forward to taking on your challenges.

Уебсайт
PREMOEM GMBH

Германия

Предприятието PREMOEM GMBH, e Производител, и работи в сферата на Уплътнителни съединения и набивки. Освен това развива дейност и в сферата на Хидравлични клапани, hydraulic clutches, One-way restrictors, Hydraulic screw connections, Compression ring pipe unions, Bolt, Screwdriving technology, Coupling technology, и Valve technology. Седалището му е в/ъв Düsseldorf, Германия.

Страница за вашия бизнес

Виждате ли това? Виждат го и Вашите потенциални клиенти! Регистрирайте се, за да Ви намират в europages.

Добави моя бизнес

KARL WIDENMANN ARMATURENFABRIK U. METALLGIESSEREI E.K.

Германия

Предприятието KARL WIDENMANN ARMATURENFABRIK U. METALLGIESSEREI E.K., e Производител, и работи в сферата на Промишлена тръбна арматура. Освен това развива дейност и в сферата на Cast iron part, Moulded tin bronze parts, Moulded leaded tin bronze parts, Moulded aluminium multi-alloy bronze parts, Moulded aluminium parts, Moulded iron parts, Moulded bearing metal parts, Shut-off valves, и bronze casting. Седалището му е в/ъв Heidenheim, Германия.
ANTHERMO GMBH

Германия

Предприятието ANTHERMO GMBH, e Производител, и работи в сферата на Топлообменници. Освен това развива дейност и в сферата на Fittings compliant with ANSI B 16.11 and MSS SP 97, Waste gas heat exchangers, Air heat exchangers, Thermopanels, Therm plate, heat regeneration systems, Evaporator plate, Spectacle blind gaskets (fittings), и heat exchangers for chemical use. Седалището му е в/ъв Kamen, Германия.
WILHELM LÜSEBRINK GMBH

Германия

Our company has been one of the largest producers of wire goods in Europe for decades. In 1852, Wilhelm Lüsebrink, the village blacksmith, first produced eyebolts with wood thread in the German district of Öckinghausen, Halver – a product that is still one of the most important in our range today. In a good mixture of tradition and modernity, we now produce and supply markets all over the world from two sites. Modern production methods and logistics, complete adherence to quality and deadlines and the ability to react flexibly to special customer requirements are the decisive competitive advantages and the guarantee for our company's success, now in its sixth generation. LÜSEBRINK – we can fix it.

Уебсайт
LK ZERSPANUNGSTECHNIK GMBH

Германия

We are a company in the field of CNC machining, specialising in the production of screws, connecting elements and made-to-order parts. Our company is based in Trier, near the Luxembourg border. The materials that we use for manufacturing include stainless steels, chrome-nickel steels and super duplex such as 1.4410 or 1.4501, as well as high-temperature nickel-based alloys such as Inconel 2.4856 or Nimonic 2.4952. We boast over ten years of experience, and we manufacture products on two new CNC-controlled machines as well as numerous others. We'd be glad to direct you to our homepage: www.lk-zerspanungstechnik.de. You can find further information about us here. We have also attached our digital flyer for you. Since 7th June 2023, we have been approved in line with AD2000 W0. We successfully achieved ISO 9001 certification on 20th June. We really look forward to hearing back from you, and we hope you'll allow us to be your supplier and manufacture products for you.

Уебсайт
OTTO EICHHOFF GMBH & CO. KG

Германия

Предприятието OTTO EICHHOFF GMBH & CO. KG, e Multi-Category, и работи в сферата на Производство на болтове. Освен това развива дейност и в сферата на turned small parts, rivets, Cold formed parts, plastic screws, Threaded bushes, spindles, Spacing sleeves, Self-clinching studs, и Screws made to order. Седалището му е в/ъв Lüdenscheid, Германия.

TOX-DÜBEL-TECHNIK GMBH

Германия

Предприятието TOX-DÜBEL-TECHNIK GMBH, e Производител, и работи в сферата на Закрепване - материал. Освен това развива дейност и в сферата на Plugs, All-purpose dowels, Universal dowels, Expansion dowels, Aerated concrete dowels, Bolt anchors, concrete screws, anchor bolts, и Composite mortar. Седалището му е в/ъв Krauchenwies, Германия.
ERNST THOMAS GMBH

Германия

Предприятието ERNST THOMAS GMBH, e Производител, и работи в сферата на Закрепване - материал. Освен това развива дейност и в сферата на Анкерни болтове, Резбовани оси, Гайки, Винтове, Анкерни болтове, Резбовани оси, Гайки, Винтове, и Hammerhead bolts. Седалището му е в/ъв Hemer, Германия.

HAFNER-PNEUMATIK KRÄMER KG

Германия

Предприятието HAFNER-PNEUMATIK KRÄMER KG, e Производител, и работи в сферата на Пневматични - инсталации и инструменти. Освен това развива дейност и в сферата на Клапани за пневматична техника, Клапани за пневматична техника, Valves, Pneumatic cylinders, и Bolt. Седалището му е в/ъв Kornwestheim, Германия.
SITEMA GMBH & CO KG

Германия

SITEMA is the only company in the world specialising exclusively in the development and production of clamping devices and linear brakes on round rods. The consequence of that specialisation: SITEMA is an internationally respected partner to machinery manufacturers. We specialise in securing, clamping and fixing loads in axial motion. It is a field in which we have been a leading brand name for many years, particularly with our SITEMA clamping heads. Alongside our broad product portfolio, we offer unique consulting and solution-delivering expertise to meet any challenge. SITEMA develops and produces hydraulically, pneumatically, mechanically and electrically operated clamping units for a many different applications.

Уебсайт
JÄGER & FRESE GMBH

Германия

Manufacturing and distribution of connecting elements with a 3600 square metre production and warehouse area. Our customers include the furniture industry, the woodworking industry and staircase manufacturers, machine and apparatus production, shopfitters and shelving manufacturers, heating manufacturers and the sanitary sector. Our special services: High supply capacity and on-time delivery and arrangement, packaging and assembly of small iron and plastic parts. Our speciality is manufacturing height-adjustable screws and furniture gliders made of steel, stainless steel and plastic. Our product range covers dimensions of M 8x10 mm to M 24x300 mm, with all common surfaces. We are happy to help with new technical developments and problems – we will work together with you to find a solution.

Уебсайт
BECHTEL GMBH

Германия

Bechtel from Wuppertal is a supplier of spare parts and components for the bulk handling industry. We are your contact for parts in: elevators, chain conveyors, screw conveyor. We supply from our extensive stock conveyor chains, drop forged chains, sprockets, elevator belting, elevator buckets and much more with short delivery times. We also offer our customers quick delivery times for special solutions such as special materials or special designs. We have the possibility to design millimeter-precision special designs by means of 3D-supported software and present them accordingly to the customer. We draw on a great experience and offer our customers practical solutions for every need. Together with the customer, we work out solutions for elevators, chain conveyors and screw conveyors.

Уебсайт
GOEBEL GMBH SCHRAUB- UND VERBINDUNGSTECHNIK

Германия

Goebel is a family-run, internationally active group of companies for fastening and installation technology. We consider ourselves specialists for developing innovative and high-quality fastening elements and the machining system that goes with them. Our friendly and experienced employees, agents and sales partners ensure that our customers are satisfied and actively support the entire procurement and value creation chain. Quality is crucial. This applies to the products and services as well as the technical and organisational development of the company. Goebel wants to be a fair partner to its customers, suppliers and employees. Mutual respect, honesty and friendliness are the foundations of a trusting partnership. We grow as a result of the tasks customers set us.

Уебсайт
GERHARD STOLL GMBH & CO. KG

Германия

As a family-owned company, at our Pforzheim site, we produce and sell rotating parts, standard parts and semi-finished products in the area of connection, fluid, installation and production technology. Our core competence is the manufacture of rotary parts, including for the automotive, electrical and plastics processing industry. With over five decades of expertise, we are a reliable partner for DIN parts and individual solutions. Our aim is to take the very best care of our customers. This is ensured by continuous and extensive quality management based on the basic principle of continuous improvement. Our products, processes and workflows are permanently put to the test. According to our motto "Quality since 1961", we not only rely on our own expertise, gained from internal training and further training measures and an internal suggestion scheme, but are also involved externally in the area of total quality management .

Уебсайт
BLIS KUGELGEWINDETRIEBE GMBH

Германия

The range of services and supply of BLIS Kugelgewindetriebe GmbH includes: Ball screws in whirled and ground versions, according to DIN and customer drawing with standard or special nuts, trapezoidal spindles in rolled and whirled versions, linear guides, accessory parts like bearings and bearing blocks, repairs and checks of ball screws.

Уебсайт
BAIER DREHTEILE GMBH & CO. KG

Германия

CNC turned parts and automatic turned parts made from all machinable materials in accordance with DIN, a drawing or template. Our product range includes everything from simple turned parts to highly complex, ready-to-install components. The parts are used in the automotive, hardware/safety technology, fastening technology and valve sectors as well as the electronics industry. Our machinery creates the optimum preconditions for our customers' wide range of parts. CNC long and short lathes (capacity: 2-65 (175) mm); CNC high-performance milling lathes (capacity: 15-65 mm); Multi-spindle lathes (capacity: 5-35 mm); Single-spindle lathes (capacity: Up to 15/20/26/36/42/65 mm); Our range of services also includes system logistics and finishing of assemblies, e.g. grinding, vibratory grinding, labelling, milling, punching, curing and surface treatments.

Уебсайт

LEDERER GMBH

Германия

Lederer has been one of the leading providers of stainless steel connection elements for over 50 years and offers more than 60, 000 different articles directly off the shelf: - Screws, bolts, nuts, rings, washers, etc. - Made of stainless steel, steel and non-ferrous materials - Standard parts - DIN, EN, ISO and in-house standards - Articles and special materials according to drawings. At the same time, more and more customers are relying on process-optimised procurement via C-parts management from Lederer. Benefit from the following advantages yourself: - Up to 50% process cost reduction - Permanent availability and guaranteed quality - Reduced capital commitment thanks to inventory reduction - Individual logistics, e.g. Kanban, consignments, and more. Lederer is large enough to implement comprehensive, detailed projects – we would be happy to provide examples of previous projects if requested – and, at the same time, small enough to be able to react quickly, flexibly and unbureaucratically to the demands of the market and our customers.

Уебсайт
REICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH

Германия

Founded by my grandfather in 1946, our family-run company has been continually developing ever since in line with the market requirements – from a spare parts manufacturer for the mining industry to an inter- nationally renowned specialist in power transmission engineering. Today, we develop and produce torsionally flexible couplings at a high level of vertical integration under the REICH-KUPPLUNGEN brand. These products are predominantly used for combustion engines in stationary and mobile applications – for example in power generation plants, in construction machinery, in commercial vehicles, in railway engineering, and in the shipbuilding industry. Another essential component of our success is the “Designed to Customer” principle which allows us to create customised high-quality and long-lasting power transmission products in close cooperation with the customer. Our commitment to flexibility, quality, and on-time delivery, and our ability to respond to the most di- verse requirements are providing daily proof that customer satisfaction is of top priority to us. Since I joined the company’s management I have dedicated my efforts to preserve these values and to position our company for a safe and successful future also in the third generation. Yours, Christian Reich

Уебсайт
AS SCHWEISSTECHNIK GMBH ARNHOLD

Германия

AS-Schweißtechnik GmbH is a family-run company with 15 employees. Ever since 1980, we have been producing stud welding units, accessories, stud welding machinery and welding studs from our 900 m² site. 1980: Company established by Hans-Joachim Arnhold. 1980-1990: Developing new equipment technology and expanding business areas. 1990: Construction of the current main building for administration, equipment production and stud storage. 1998: Expansion of the new building to include storage and production facility for special equipment. 2000: Into the second generation as Martin Arnhold joins the company. 2008: Introduction of the ISO 9001 quality standard. December 2013: Company founder Hans-Joachim Arnhold hands the company over to his son, Martin, and begins his well earned retirement. We operate in more than 50 countries around the world.

Уебсайт
BÄCKER GMBH & CO. KG

Германия

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Уебсайт
MAHLO GMBH & CO. KG

Германия

Mahlo is among the worldwide leading manufacturers of measuring, control and automation systems for the textile, non-woven, coating and finishing industry as well as the film, extrusion, paper and cardboard sector. Mahlo is based in the Bavarian town of Saal an der Donau, Germany, but has branches in Italy, Belgium, Spain, China and the USA, which provide services to the most important markets. International representative offices and service stations are there to help customers all over the world. Mahlo's product range includes weft straighteners and process controls for textile finishing, pattern recognition and pattern measurement for patterned fabrics, quality control and profile control for coating and processing continuous web fabrics via data management for productions processes, and hand measurement devices. The traditional Bavarian family company, founded by Dr Heinz Mahlo in 1945 and still in the family today, is proud to develop and produce its products exclusively in Germany.

Уебсайт
WBR ROHR- UND BAUELEMENTE GMBH

Германия

As a technologically leading supplier, we have been the preferred partner of the international construction industry for years. Our longitudinally welded cladding tubes for pre-stressed concrete technology and the rectangular cavity pipes for the pre-cast industry are just two examples of our outstanding manufacturing competence. This is why we are constantly striving to push ahead with new innovations and further developments. Thin-walled, longitudinally welded tubes by the metre or tube cylinders for use in various industrial sectors are an expression of our technological leadership in development and production. We manufacture precisely fitting tubes and components for "rational construction" in the highest product quality, which is a matter of course for us. In addition, we convince with our customer-oriented, competent advice and a flexible, reliable and efficient service. Thus we can also provide you with tailor-made solutions for a wide range of requirements.

Уебсайт
HS UMFORMTECHNIK GMBH

Германия

HS Umformtechnik GmbH is a medium-sized family-run business which has grown continuously since it was founded in 1997. We keep the promises we make. At our company headquarters in Grünsfeld-Paimar, Germany, our 50 motivated employees produce high-quality stainless steel pipe bends, pipe couplings, coupling stations, suction tubes, branch and transition pieces as well as customized parts using cutting edge machinery at our production site which covers 12, 000 square metres. In doing so, we not only engage in effective problem solving and scout out top quality products on behalf of our customers, we also provide a good price/performance ratio. Beyond this, we always have all common dimensions of stainless steel bent pipes and pipe couplings as well as stainless steel pipes in stock in our around 5000 square metres of production and storage space. Besides consistent high quality, this also means short delivery times for our customers.

Уебсайт
FÖRDERTECHNIK KENTZLER GMBH

Германия

Fördertechnik Kentzler GmbH is your reliable partner for drive chains, conveyor chains and load chains as well as sprockets and special designs. Experience and expertise form the cornerstone of our high-quality products. Benefit from our services from the very beginning: From consultation and the selection of components precisely tailored to your requirements to the completion of the product. We offer everything from special chains to sprockets through to custom-made chains of any type. Our broad range of products includes standard products as well as complete solutions tailored to the requirements of the individual customer. Thanks to our many years of experience and the compliance with current DIN standards, we can guarantee outstanding product developments. No matter how satisfied our customers already are, we continually strive to increase the grade, performance and quality of our products.

Уебсайт
BTS BEFESTIGUNGSELEMENTE-TECHNIK GMBH

Германия

BTS Befestigungselemente-Technik GmbH is a medium-sized company in the metalworking industry, focused on the manufacture and sale of fastening and connecting materials. The company was founded in 1983. It is located in Saarburg, in the German state of Rhineland-Palatinate, and employs around 50 members of staff. The product range comprises wing nuts, wing screws, cap nuts, timber connectors, beam clamps, channel nuts, sliding blocks, hammer-head bolts and various specialist parts made to drawings or samples. It is supplemented and expanded continuously. Our company is characterised by a high added-value chain, from metal casting "Made in Germany" to mechanical processing, customer-specific surface treatment and individual packaging. We act based on our customers' requirements, in a flexible and quality-conscious manner and through certified management systems.

Уебсайт
NWS GERMANY PRODUKTION W. NÖTHEN E.K.

Германия

NWS Germany Produktion In 1973 Willibald Nöthen, founded NWS together with his experienced staff and he was able to connect successfully tradition with change. Within more than 40 years NWS developed into an accepted partner of industry and trade. Several awards for function, quality and design of hand tools are our advertisement for our focus on innovation. New developments as well as patents guarantee exclusivity and expansion. With the growing competence for good tools and suitable manufacturing depth, NWS today is a partner who makes customers´demands for function, quality and design their focal point. The recipe for success is based on the philosophy of providing professional craftsmen and women with a sophisticated tool of "Made in Germany" quality and with enhanced functions and an attractive design. The intelligent combination of tried-and-tested manual production techniques and state-of-the-art machine processes guarantees first-class quality and enables us to strike the ideal balance between tradition and innovation. Safety and ergonomic design, health and environmental compatibility, high-grade materials and inventive detailed tool solutions are all at the focus of our development and production processes. Highest grade workmanship, adherence to stringent quality criteria and standards and selective final quality control procedures ensure the exclusive standard of nws tools.

Уебсайт