Резултати за

Small parts molding - Внос износ

19 Фирми

0 Продукти

SCHAUENBURG INDUSTRIETECHNIK GMBH

Германия

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Уебсайт
PLS GMBH

Германия

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Уебсайт
BECHTOLD & SOHN GMBH & CO. KG

Германия

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Уебсайт
IMOLDING DEUTSCHLAND GMBH

Германия

iMed is an expert supplier of technical precision parts and assemblies made from plastic in small-, medium- and large-scale series for use in key industries. As a system supplier, iMed can look back on more than a decade of experience. This experience is not limited to a single branch of industry. It's not just the use of state-of-the-art technology that has ensured satisfied, long-standing customers and their trust in the production quality of iMed. Outstanding employees accompany each product from the first development step all the way through to series production. iMed values supporting the company's own new recruits as well as offering continuous and further training, and intensive courses. Our in-house experts therefore work with the same professionalism that is displayed by the customer's experts.

Уебсайт
GEBR. W. + H. ZAUGG AG

Швейцария

In over 70 years, Gebr. W. + H. Zaugg AG has built up expertise that is unique. Only this way can perfect products be produced, which withstand the technically demanding market of today. Innovation and precision are essential in mould construction and injection moulding. We act and work accordingly every day to give our customers the best. The company Gebr. W. + H. Zaugg AG is a family business owned by Bettina Ulrich-Zaugg and Stephan Ulrich. We are your partner for perfect plastic parts, mould construction, production of individual parts, 3D printing and servicing.

Уебсайт

Страница за вашия бизнес

Виждате ли това? Виждат го и Вашите потенциални клиенти! Регистрирайте се, за да Ви намират в europages.

Добави моя бизнес

KORNFELD ANTON ING. GESMBH &CO KG

Австрия

Предприятието KORNFELD ANTON ING. GESMBH &CO KG, e Производител, и работи в сферата на Формоване на стомани и метали. Освен това развива дейност и в сферата на Пластмасови материи - изходни материали за промишлеността, Форми за керамичното производство, Фрезоване на стомани и метали, Форми за пластмасови материи и каучук, Пластмасови материи - полуфабрикати, Обработка на пластмаси, tool manufacturing, Tool manufacture for injection moulded components, и Пластмасови материи - изходни материали за промишлеността. Седалището му е в/ъв Günselsdorf, Австрия.
WETEC GMBH

Германия

Предприятието WETEC GMBH, e Производител, и работи в сферата на Впръскване на каучук и леене под налягане на пластмаса. Освен това развива дейност и в сферата на Plastic assemblies, Plastic precision parts, Plastic injection-moulded parts, Technical-grade plastic parts, Plastics processing, Prototype construction, Injection moulding tools for plastics, injection moulds, и Injection-moulded parts made from thermoplastics. Седалището му е в/ъв Schweppenhausen, Германия.
MPI EUROPE GMBH

Германия

Предприятието MPI EUROPE GMBH, e Производител, и работи в сферата на Впръскване на каучук и леене под налягане на пластмаса. Освен това развива дейност и в сферата на Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, и Plastic components for medical technology. Седалището му е в/ъв Doebeln, Германия.
INTERNORM KUNSTSTOFFTECHNIK GMBH

Германия

As a Grimme Group company, we produce high-quality plastic products in-house: Rollers and roller coatings made of polyurethane plastics, moulded parts and injection-moulded items. Franz Grimme founded the company in 1987 in Damme (South Oldenburg, Germany). With modern and efficient products, we have transformed from a small company into a medium-sized business. Nowadays, we offer a wide range of customer-specific solutions for the international market. We are active in many different fields.

Уебсайт
BRUGGER GMBH MAGNETSYSTEME

Германия

As a leading manufacturer of permanent magnetic components, we have offered all our products and services from a single source since 1963. From the development, design and manufacturer of our own tools and products, the production of individual stamped and drawn parts, as well as plastic injection moulding parts, through to the installation of the magnet systems, everything is located at one site in Hardt. With a modern machine fleet, innovative product concepts and a high level of expertise in consultancy, we manufacturer several million magnet systems "Made in Germany" every year. An extensive inventory of standard products enables rapid and flexible order processing. This means that it is possible to supply everything from small individual parts to large series parts. The application areas for the permanent magnetic components range from the automotive industry, the lighting and medical equipment industry and the building sector to decorative applications and name badges.

Уебсайт

BERGMANN & HILLEBRAND GMBH & CO KG

Германия

In addition to manufacturing precision sheet metals, Bergmann & Hillebrand provides services to process these into stamped, drawn and bent parts. The company specialises in perforated plates with small hole widths, high openings and high demands on optical and functional quality. Whether it concerns demanding functional components for technical applications, high-end multimedia applications, tailor-made moulded parts for design-oriented products or prototypes, special editions or small batch production, we always meet our customers' expectations and often even manage to surpass them. Contact us. We will personally take care of your issue and find the ideal solution for your product as well. The successful tradition that spans three generations of Bergmann & Hillebrand has continually resulted in quality, innovation and progress. Today, this tradition is embodied by the owning family, the board of directors and a confident workforce of around 40 employees, who are as highly trained as they are highly motivated..

Уебсайт
RUDOLF STÖFFL GES.M.B.H. TECHNISCHE PRODUKTE

Австрия

Innovative, skilled and fair ... with this philosophy in mind, a small team around Rudolf Stöffl founded the Austrian company RUDOLF STÖFFL GmbH in 1989. The company, based in Holzhausen and enjoying steady growth, made a name for itself right from the beginning, and took on a soon well established role on the market. Stöffl GmbH was primarily active in the sale and expansion of an extensive range of bonded rubber-metal products for trade and industry. Healthy growth and growing acceptance on the market created the conditions for efficient expansion into new product groups. We can now offer our customers: Profiles in the form of PVC edge trims, sealing profiles, sponge rubber, plastic parts such as moulded tube plugs or sealing elements, standard parts such as knobs and handles, cable glands, connections, and special components for conveyors. The product groups in the area of plastic hoses, PU protection profiles and rubber sheets were expanded.

Уебсайт

FRITZ WOHLENBERG GMBH

Германия

We specialise in manufacturing moulded parts, profiles, O-ring cords and hose rings. In our work, we place a particular emphasis on the small- and medium-series segment, as well as custom-made products. Achieving the right blend is key and remains our best-kept secret. When developing our formulations, we use a number of different raw materials that are compatible with one another. You will still be able to find the unique mix that makes up your product even years later. Quality examples: Hydrolysis-resistant PU. HNBR, FDA conformity in EPDM, NR, NBR and FKM. KTW/W270 – EPDM 70 ±5 Shore A black. KM – also available in different colours. NBR up to -40 °C. Black FDA-compliant qualities in EPDM + NBR. We have six state-of-the-art return presses and two Maplan injection presses in operation. We also have two cold-feed and four conventional extruders for producing profiles. In addition, since early 2021, we have also operated a film vulcanisation system.

Уебсайт
EWOQE GMBH & CO. KG

Германия

EWOQE GmbH & Co. KG is your innovative partner in additive manufacturing and prototype construction, specialising in technical plastic injection-moulded parts and tailored solutions for vehicle construction, medical technology and beyond. With a focus on rapid prototyping, rapid tooling and 3D printing technologies, we offer a wide range of services, from 3D designs to small series production. Our expertise extends to the optimisation of component functions and throughput times in order to boost your innovative strength and save costs. Our aim is to efficiently solve challenges such as missing components or a lack of production capacity, and to offer you tangible added value. We see 3D printing as a tool for promoting innovation that fits perfectly into your production processes. From brainstorming to realisation, we support you with custom advice, and use our comprehensive expertise to successfully implement your projects. At EWOQE, we pride ourselves on achieving outstanding results every day, and see ourselves as your reliable B2B partner. Contact us at info@ewoqe.com to find out how we can contribute to the success of your next project with our expertise in 3D printing and additive manufacturing. Come to us to discover the unlimited possibilities of 3D printing for your product development.

Уебсайт
MING XIAO MANUFACTURING CO., LTD

Китай

Ming Xiao Manufacturing Co., Ltd. is a professional ISO9001 certificated Metal Parts & Plastic Parts manufacturer, Located in China Ningbo, Specialized in Services of Sheet Metal Fabricating, CNC Turning & Machining, Tube Bending, Cold Forging & Hot Forging, Plastic Injection Molding & Plastic Extrusion. We produce small & large turned parts and machined parts, Precision CNC Turned Parts by CNC Turning & Milling. Metal stamping Parts, Deep Drawing Parts, Metal parts welding and forming, Pipe Bending & fabricating components, Cold & Hot Forged Parts from Stainless Steels, Carbon steels, Brass & Copper, Aluminum Alloys. And produce Plastic injection molded parts, Plastic extrusion profiles and tubes. We are working metal parts & plastic parts for various industries, custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample, such as metal shafts, steel rods, bushings, Sleeves, Flanges, tubes, pipe coupling, fittings of valves; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold & hot forging parts, studs, bolts, screws, nuts, pins; steel wire forms, metal springs and all kinds metal components, plastic injection molded parts, plastic extrude profiles and pipes… We provide a wide range of machining services, can satisfy the customer many types of products one-time order. If you need custom any metal parts or plastic parts, pls feel free to contact us for a quote.

Уебсайт
BRUSCHI MICROMECCANICA SRL

Италия

Bruschi is a third-party manufacturer of high quality customised mechanical components made by turning. It is dedicated to operations on small parts, stainless steel, titanium and aluminium alloy turning, automatic CNC turning with tailstock and CNC plastics turning that can be moulded from bar stock, on horizontal and vertical machining centres with 5-axis continuous machining.

Уебсайт
BRUSCHI MICROMECCANICA SRL

Италия

Bruschi is a third-party manufacturer of high quality customised mechanical components made by turning. It is dedicated to operations on small parts, stainless steel, titanium and aluminium alloy turning, automatic CNC turning with tailstock and CNC plastics turning that can be moulded from bar stock, on horizontal and vertical machining centres with 5-axis continuous machining.

Уебсайт
MASCHINENFABRIK BERTHOLD HERMLE AG

Германия

Maschinenfabrik Berthold HERMLE AG is a German listed company with its head office in Gosheim in the district of Tuttlingen and is one of the leading manufacturers of milling machines. Globally there are more than 30000 machines in use, mainly at suppliers of medical technology, in the optical industry, in aviation, in the automotive industry and in motor sport. The most important components are developed and manufactured in Gosheim. HERMLE’s universal milling machines and machining centres are used for the machining of tools, moulds and series-produced parts. HERMLE produces small to medium-sized three to five-axis milling centres for a wide range of applications. Even machines for applications with increased demands on precision or machining volumes are manufactured. The different machine models are available with magazine extensions and a pallet changer. Furthermore, various handling systems are offered directly from the manufacturer. HERMLE is all about milling and achieving outstanding results. This is clearly demonstrated by the slogan "milling at its best". It stands for high-performance, highly innovative machining centres which have risen to a leading position nationally and internationally. It stands for a far-reaching and closely meshed sales and service network and for a worldwide presence.

Уебсайт
JV ELECTRIC

България

Предприятието JV ELECTRIC, e Производител, и работи в сферата на Впръскване на каучук и леене под налягане на пластмаса. Освен това развива дейност и в сферата на Каучук и пластмаса - преработване, Plastic parts injection molding, plastic injection molded parts, Precise plastic injection parts, Каучук и пластмаса - преработване, Technical plastic parts, Plastic parts for power tools, Plastic parts for Household appliance, и Plastic parts for Lightening. Седалището му е в/ъв Chernozemen, България.

Намерете оферта за

Филтри

Резултати за

Small parts molding - Внос износ

Брой резултати

19 Фирми